Product Description:

The MAC063A-0-ES-4-C/095-A-0/WI511LV/S001 belongs to the MAC AC Servo Motors series from Bosch Rexroth Indramat. It functions as a motor for analog drives, supplying torque and real-time feedback to velocity and position controllers used in industrial automation. The design supports tachogenerator and encoder signals so that established control systems can monitor shaft speed and position without additional transducers. This combination allows the motor to serve automated equipment that requires responsive motion control and compatibility with analog drive technology.

A centering diameter of 95 mm aligns the housing precisely with mounting fixtures, while natural convection removes heat through the frame without external fans or liquid circuits. Shaft torque is transmitted through a DIN 6885 keyway, providing positive mechanical engagement with pulleys or couplings. The rotor reaches a nominal speed of 3500 rpm, matching drive outputs intended for high-speed response in compact motor frames. Power enters through a single connector on side A, keeping cable routing on the same side as the feedback connection and simplifying installation. The motor has no blocking brake, so external clamping or static motor torque must hold the load when power is removed. The A-length stator helps limit overall mass while allowing the ES winding to maintain its rated operating temperature. Standard tacho quality provides suitable linearity for velocity loops that use an analog feedback channel.

The tachogenerator develops 1.5 V/1000 rpm, providing the drive with a proportional speed signal when digital encoder feedback is not used for velocity measurement. Position data is supplied by an incremental encoder mounted through the standard feedback interface used for this motor series. The ES winding code indicates resistance and inductance values suited to compatible MAC analog amplifiers. Frame size 063 keeps the motor compact while supporting applications with medium-inertia loads. The feedback assembly marked WI511LV transmits incremental position pulses to a compatible controller, allowing the control system to track shaft movement during operation.