Product Description:

The MAC063A-0-ES-3-C/095-A-0/S001 is an AC servo motor built by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. This model is supplied as a motor for analog drives, so it receives proportional voltage or current commands from analog amplifiers and translates them into precise shaft rotation for positioning and velocity control on automated machinery. It provides a compact, brushless actuator for legacy motion systems where digital fieldbus communication is not required. Brushless operation also supports repeatable motion and reduces internal wear parts.

The motor has a centering diameter of 95 mm, allowing direct flange mounting without alignment sleeves. Heat is dissipated through natural convection, so no forced-air hardware is required. Rated speed capability reaches 3500 min⁻¹, which suits fast indexing and handling axes. This motor belongs to size 063, a frame class that balances torque density with overall mass on compact stations. Internally, winding code ES indicates the coil layout and insulation used with compatible analog servo drives. The unit is shipped without a blocking brake, so external holding devices must secure static loads, and the motor uses standard tacho feedback for general-purpose speed sensing.

Speed feedback is provided by tacho feedback and a second shaft end. The tachogenerator supplies an analog velocity signal, and the extended shaft allows an additional encoder to be fitted when the application needs separate position feedback. That tachogenerator delivers 1.5 V/1000 min⁻¹, giving drive electronics a linear reference over the full operating band. The motor is built in length code A, which keeps the stack short for installations with limited axial space. Power is routed through a connector on side A, which helps keep cable routing orderly along the machine frame.