Product Description:

The MAC063A-0-ES-2-C/095-A-1/S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is designed for analog drives and converts command signals into controlled rotary motion for closed-loop velocity and position tasks. This makes it suitable for pick-and-place gantries, compact presses, and auxiliary machine axes that need repeatable motion in automated equipment. In these applications, the motor serves as the rotary output element that responds quickly to changing drive commands while maintaining stable motion.

At its nominal operating point, the rotor reaches 3500 rpm, a speed suited to moderate-inertia loads that require quick indexing without overshoot. The winding code ES indicates the electromagnetic layout used for this motor, so the matched drive can regulate current with the expected electrical characteristics. Heat is removed by natural convection, which allows fan-free cooling as long as the housing has access to circulating ambient air. This cooling method helps keep the motor installation simple because no auxiliary blower is needed. A centering diameter of 95 mm helps align the motor accurately with couplings or gearheads during installation.

The mechanical interface includes a standard blocking brake that provides 3 Nm of holding torque when power is removed, helping keep suspended or vertical loads from drifting. For speed feedback, the motor uses tacho feedback and outputs 1.5 V/1000 rpm so the analog controller can monitor real-time shaft speed without a separate encoder channel. This signal supports stable velocity regulation in systems that rely on tachometer input from the motor. Power conductors connect through a connector on side A, which helps keep cable routing clear of the motor body and can simplify installation where space is limited near the mounting face. The frame size 063 and short length A support low rotor inertia and quick acceleration for compact axis applications.