Product Description:

Bosch Rexroth Indramat manufactures the MAC063A-0-ES-2-C/095-A-0/S006, a member of the MAC AC Servo Motors series. As a motor for analog drives, it supplies closed-loop torque and speed control to compact positioning axes and pick-and-place modules in automated machinery. Integrated tachometer feedback delivers the velocity signal required by legacy analog amplifiers, and the mechanical interface follows IEC dimensions for compatibility with standard machine layouts. Its role is to convert electrical energy into precise rotary motion for industrial automation.

A centering diameter of 95 mm allows direct flange mounting on gearboxes or machine plates with minimal concentricity error. Under rated excitation, the rotor reaches 3500 rpm, a speed that suits medium-inertia loads in material-handling equipment. Heat generated by the windings is removed by natural convection, so unobstructed airflow around the housing is required to maintain acceptable operating temperature. The built-in tacho generator outputs 1.5 V/1000 rpm, giving drive electronics a linear velocity reference without extra sensors. Power is supplied through a compact connector on side A, which can simplify cable routing when the motor is installed against a rear panel.

The integrated feedback is provided in standard quality, which supports most velocity loop requirements. The 063 frame pairs the motor with compact planetary reducers while still delivering the torque expected from this motor size. Electrical characteristics follow winding code ES, allowing the analog amplifier to reach nominal current without approaching saturation. The motor has no blocking brake, so external holding devices must secure vertical axes during shutdown. The A length keeps the overall shaft extension short, which can ease enclosure integration and reduce overhung mass on paired bearings.