Product Description:

The MAC061C-0-NS-2-C/095-B-1/S001 is a compact AC servo motor produced by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. It is identified as a motor for analogue drives, meaning it pairs with legacy analog amplifiers rather than digital fieldbus systems, and it supplies closed-loop torque and speed control for positioning axes, pick-and-place heads, or light machine tools in industrial automation.

This model centers itself on a machine flange through a 95 mm pilot diameter, ensuring concentric mounting and repeatable shaft alignment with gearboxes or couplings. Rotor electromagnetics correspond to the NS winding code, so the drive must be set to the matched voltage and current range for that coil variant to prevent saturation. Motion feedback is provided by integrated tachofeedback; the generated analog voltage is proportional to shaft speed and is routed directly into the velocity loop of an analog controller. Power conductors leave the housing through a connector on side B, simplifying daisy-chain routing when several motors share the same cabinet wall and keeping cables clear of moving machine parts.

Heat is removed only by natural convection, which dictates that continuous load ratings are maintained when ambient airflow is unrestricted around the stator body. A standard blocking brake is fitted to hold the load when power is removed; it releases automatically once the amplifier energizes the brake coil. The motor is classified as a motor for analogue drives, so its dynamic constants align with the current-mode regulators common to that amplifier family. Velocity resolution is governed by a standard tacho quality disc, suitable for mid-range speed loops where fine incremental positioning is not required. Maintenance teams familiar with **Bosch Rexroth Indramat** analog control platforms can therefore integrate this unit without altering existing tuning procedures.