Product Description:

The MAC041C-0-TS-4-E/050-B-1/WI671LV/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat and placed within the MAC AC Servo Motors series. It is designed as a rotary actuator for closed-loop motion tasks in analog drive environments, where the drive regulates torque and speed from command signals. The motor converts command voltages into controlled shaft rotation for positioning, indexing, or velocity control in automated equipment. This operating role suits machinery that depends on repeatable starts, stops, and directional changes during normal cycle operation.

A standard blocking brake is integrated so the shaft can be held when power is removed. This is useful on vertically mounted axes or in stop conditions where the load must remain in place. Heat generated by the stator is dissipated through natural convection, eliminating the need for forced-air devices and simplifying surrounding machine layouts. The motor body uses the 041 length code, which indicates the active magnetic stack depth and affects continuous torque capability. Frame designation C corresponds to the outer housing diameter used to match IEC-pattern mounting flanges. Inside the stator, the windings follow the TS code, and this electrical design sets the phase resistance and inductance so current ratings align with analog servo amplifiers in the same power class.

Main power is delivered through a connector on side B, keeping the opposite end clear for feedback cabling and mechanical coupling and helping cable routing stay organized around the machine. Rotor position is reported by an incremental encoder mounted in the standard interface, allowing the drive to derive speed and commutation signals directly from the motor during operation and maintain coordinated axis control. The feedback module also supports tacho feedback or an optional absolute encoder when higher resolution or multi-turn position data are required, so the motor can be matched to applications that use different feedback arrangements.