MAC041C-0-TS-4-E/050-A-1/WI671LV/S007
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC041C-0-TS-4-E/050-A-1/WI671LV/S007 is an AC Servo Motor with a nominal speed of 3000 rpm. Manufactured by Bosch Rexroth Indramat, this motor is part of the MAC Permanent Magnet Motor series and weighs 4.5 kg. It offers a WI Encoder feedback type, stall torque of 0.85 Nm, and a protection class of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MAC041C-0-TS-4-E/050-A-1/WI671LV/S007 is a Bosch Rexroth servo motor from the MAC series. It is produced for use in industrial automation. The motor supports feedback via an integrated tacho generator. Tacho feedback provides speed and position evaluation. In addition, this motor is equipped with an optional encoder. The continuous standstill torque is 2.05 Nm and the motor can deliver 6.2 Nm peak torque for 300 milliseconds. When a step command is issued and there is no load torque or moment of inertia, the motor takes 21 milliseconds to accelerate from 0 to maximum RPM and 19 milliseconds to decelerate from maximum to 0 RPM. Moment of inertia of the MAC041C-0-TS-4-E/050-A-1/WI671LV/S007 servo motor is 1.9 kg cm2. Peak value for regenerated power is 3.8 kilowatts and the continuous regenerated power is 0.5 kilowatts.
The motor relies on natural convection for dissipation of heat generated during routine operations. Higher load requirements can be handled by MAC motors equipped with optional surface cooling. An optional blocking brake is installed on the MAC041C-0-TS-4-E/050-A-1/WI671LV/S007 motor. This brake is designed to prevent motor movement when the motor in inactive. A 24 Volts DC signal from the motor controller is needed to allow the shaft to rotate. The brake acts as a safety device, improving reliability and safety for industrial operations. The motor controller controls motor speed and shaft position by varying the amplitude and frequency of its output. Power reaches the motor via a power cable that connects to the designated power connector on side A of the motor housing. With an IP65 rating, the housing of the servo motor is impervious to dust ingress, and is also safe from low-pressure water jets.
Frequently Asked Questions about MAC041C-0-TS-4-E/050-A-1/WI671LV/S007:
Q: Is a blocking brake installed on the motor?
A: A blocking brake is installed on the motor.
Q: Which cooling method does the motor use?
A: Bosch has designed the motor for convection cooling.
Q: What is the location of the power connection?
A: The power connection is on side A of the motor housing.
Q: How can you mount the motor?
A: MAC motors support flange mounting.
Q: What is the protection rating of the motor?
A: Protection rating of the motor is IP65.
