Product Description:

The MAC041C-0-TS-4-E/050-A-1/WI670LV is an AC servo motor built by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It translates velocity and position commands from compatible drive amplifiers into controlled mechanical rotation for pick-and-place tables, indexing conveyors, and compact processing stations. A permanent-magnet rotor and integrated position sensing support tight closed-loop regulation so machine cycles remain synchronized with upstream control logic. The housing and flange pattern follow IEC sizing practices, supporting installation in machinery built around common mounting dimensions.

The winding designation TS identifies the phase resistance and inductance expected by the drive at rated load. Cooling relies on natural convection; surface ribs guide heat to the surrounding air and help keep winding temperatures within limit when the motor is mounted in free-air orientation. A standard blocking brake is integrated at the non-drive end to secure vertical loads whenever the power stage is disabled. Frame class C uses a stator outer diameter that matches 80 mm flange hardware. Mains conductors enter through a connector on side A, positioning the cable away from moving parts when the shaft faces the work zone.

The axial stack marked 041 sets the active magnetic length and the continuous torque available at rated speed without increasing motor diameter. The unit supports tachofeedback, incremental encoder, or absolute encoder options, allowing the feedback arrangement to match the drive configuration. For applications that require only incremental data, the built-in incremental encoder with standard mounting simplifies installation by aligning the sensor body with the rear housing pilot. As a motor for analog drives, the model accepts ±10 V command interfaces, which helps it fit legacy motion systems without changing the established control method.