Product Description:

The MAC041C-0-TS-4-E/050-A-0/WI673LV servo motor is produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. As a compact rotary actuator, it works with analog servo amplifiers to deliver precise torque and velocity control in packaging equipment, pick-and-place heads, and other industrial motion axes. By translating electrical command signals into mechanical rotation, the unit serves as the primary moving element of the drive train and supports closed-loop positioning when feedback is returned to the controller. This makes it suitable for axes that require repeatable speed regulation and controlled positioning during continuous machine operation.

The winding designation TS identifies the coil impedance and current range expected by the drive. Heat is released to ambient through natural convection, so the housing and fins dissipate thermal energy without forced air or liquid cooling. Input power arrives through a connector on side A, which keeps cable routing on one face of the machine frame. The motor is supplied without a blocking brake, so an external holding method is required if the shaft must remain locked during power-off conditions. The housing uses the length index 041, which indicates the stack height and influences continuous torque.

Frame code C sets the flange diameter and pilot dimensions for this motor size. As a motor for analog drives, the unit is intended for use with analog servo amplifiers rather than digital command interfaces. Rotor position is measured by an incremental encoder with standard mounting, which supplies quadrature feedback for speed and position control. The feedback arrangement is listed as tachofeedback with an incremental or absolute encoder, indicating that the motor supports combined feedback functions for the connected drive.