Product Description:

The MAC041C-0-TS-3-E/050-A-1 is an AC servo motor produced by Bosch Rexroth Indramat for positioning and velocity control tasks in industrial automation. Part of the MAC AC Servo Motors series, the unit interfaces with analog servo drives to convert command voltages into precise mechanical motion. By integrating feedback devices and a brake, it maintains accurate shaft positioning under varying loads. This arrangement lets the paired drive correct speed deviations during changing machine cycles. It is well suited to compact axes such as pick-and-place heads or small gantries, where repeatable starts, stops, and speed changes are required.

The motor has a frame size of 041 and a C length, giving a compact housing with added active length for torque production. Thermal energy leaves the enclosure by natural convection, so no fan or external coolant is required. Installation should allow clear airflow around the housing to support heat dissipation during continuous operation. This cooling method keeps the motor mechanically simple and avoids the need for separate airflow hardware on the machine. A built-in blocking brake locks the shaft when power is removed, helping prevent drift on vertical or suspended axes.

Electrical behavior is matched to winding code TS, which indicates resistance and inductance values used by compatible low-voltage analog amplifiers. Power enters through a connector on side A, which can simplify cable routing when the motor is mounted close to machine frames or guarding. The feedback arrangement includes tacho feedback for speed regulation and a second shaft end for an external encoder or mechanical coupling. The additional shaft interface is useful when an application needs extra position sensing or a rear mechanical connection. Classified as a motor for analog drives, the unit supports closed-loop control without auxiliary adapters or forced-air cooling.