Product Description:

The MAC041C-0-TS-3-E/050-A-0/S006 is an AC servo motor from Bosch Rexroth Indramat in the MAC AC Servo Motors series. Intended for analog drive systems, the unit converts regulated armature current into precise shaft rotation for indexing tables, small manipulators, and other motion axes that require stable speed or position control. Its compact mechanical envelope supports installation in tight machine spaces, especially where mounting room around the drive train is limited. The motor is suited to small automated assemblies that need direct rotary motion without a large housing or separate cooling equipment.

The winding code TS matches the motor to analog amplifiers that supply its rated current and expected electrical characteristics. Frame size 041 gives the motor a compact diameter, while length code C provides additional active material for higher continuous torque than shorter versions in the same size group. Cooling is by natural convection, so heat leaves through the housing without forced airflow and the installation area should allow free ambient air circulation. The power leads exit through a connector on side A, which helps keep the main power cable on one side of the machine layout. This routing can also make it easier to separate motor power conductors from low-level feedback wiring.

The motor has no blocking brake, so load holding must be provided by the drive or by an external mechanical device when the axis is idle. The feedback package includes tachofeedback and a second shaft end; the tacho supplies an analog speed signal, and the auxiliary shaft can be used for an additional encoder or another monitoring device. This arrangement supports closed-loop speed regulation and allows extra sensing hardware to be added without changing the motor housing. The motor follows the dimensional, mounting, and cabling standards used across the MAC AC Servo Motors series.