Product Description:

The MAC041C-0-TS-2-E/050-B-0/S001 is an AC servo motor produced by Bosch Rexroth Indramat and supplied within the MAC AC Servo Motors series. It converts controlled current from a compatible drive into precise rotary motion, allowing tooling, conveyors, or sensors to be positioned with the repeatability required in automated assembly and packaging equipment. The compact frame and low rotor inertia support rapid acceleration during short, repetitive motion cycles while keeping the motor suitable for installations with limited space.

For thermal management, the unit relies on natural convection, so mounting must permit unobstructed airflow around the housing. Mechanical holding of the shaft must be provided externally because the motor has no blocking brake, which is important for vertical axes that require passive load retention. Position feedback is delivered through tacho feedback, giving the drive an analog speed signal that supports smooth velocity control without a high-resolution encoder. The motor size of 041 establishes the compact mechanical envelope and corresponding flange dimensions for installation. Power conductors exit through a connector on side B, simplifying cable routing when that side of the motor faces the cable channel.

The motor length code C indicates the active stack length associated with the unit’s torque capability. Winding code TS identifies the electrical arrangement, including the resistance, inductance, and thermal characteristics used by the compatible drive. As a motor for analog drives, the unit works with an external amplifier that regulates motor speed and current from the available feedback signals. This arrangement supports integration with legacy motion controllers that provide ±10 V velocity references for bidirectional speed commands. The external drive processes the reference and tacho signal continuously, adjusting motor current to maintain the commanded velocity as the mechanical load changes.