Product Description:

The MAC041C-0-TS-2-E/050-A-1/S007 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is intended for use with analog drive amplifiers, where commanded current or velocity signals are converted into controlled rotary motion for positioning axes in packaging equipment, handling gantries, and similar machinery. In closed-loop operation, the motor supplies repeatable speed and torque response so the paired analog controller can correct load changes and keep axis movement stable during starts, stops, and direction changes.

Thermal management is handled through natural convection, so the housing releases heat without auxiliary fans or liquid circuits and the surrounding layout stays simple. Power is fed through a single connector on side A, which keeps cable routing on one face of the machine and leaves the opposite side clear for nearby hardware. The internal stator uses winding code TS, which indicates resistance and inductance values matched to compatible MAC analog drives. Delivered as a motor for analog drives, the unit works with analog reference signals rather than a digital fieldbus. The mounting dimensions and interfaces follow Bosch Rexroth Indramat MAC-series conventions, so it can fit gearboxes or mounting plates that use the same platform.

A standard blocking brake holds the shaft when power is removed, which helps keep vertical or indexing axes from drifting at standstill. For speed feedback, the motor uses tacho feedback, sending a proportional voltage signal to the analog controller for stable velocity regulation across normal operating ranges. The mechanical stack length is coded as 041, while the frame diameter is size C, giving the motor a compact envelope for installations with limited space around the axis. That compact size helps the motor fit narrow columns, compact slides, and other machine sections with limited clearance around couplings and brackets.