MAC041B-0-BS-4-E/050-B-0/WI668LV
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC041B-0-BS-4-E/050-B-0/WI668LV motor boasts a single-phase design with a rated power of 2.5 kW, an air-cooled cooling method, and weighs 4.2 kg. As part of the MAC Permanent Magnet Motor series by Bosch Rexroth Indramat, it operates within a voltage range of 200-240 VAC, featuring an IP55 rating for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MAC041B-0-BS-4-E/050-B-0/WI668LV is a compact and powerful MAC series servo motor. It is made by Bosch Rexroth for industrial applications, including textiles, transfer facilities, machine tools, and robotics. MAC motors must be used with compatible motor controllers. The controllers perform two main functions: they supply motor power and control motor parameters, including torque and speed. To control motor speed and position, the controllers vary the amplitude and frequency of their AC output. Controllers use real-time feedback from the motor to determine the required change to AC amplitude and frequency. Difference between measured and desired motor parameter values is the main determining factor that helps control algorithms on the controllers module their output. When the MAC041B-0-BS-4-E/050-B-0/WI668LV motor is used with a TDM4.•-020-300-W0 controller, it delivers 6000 RPM nominal speed and 1.35 Nm standstill torque.
The peak torque output which is only available for 300 milliseconds is 5.2 Nm. Moment of inertia of the motor is 1.3 kg cm2. The acceleration time for dead stop to peak RPM is 19 milliseconds. The deceleration time from peak RPM to dead stop is 15 milliseconds. These fast response times are enabled by a range MAC motor features, including use of high-quality permanent magnets and electronic commutation. The MAC041B-0-BS-4-E/050-B-0/WI668LV motor has its power connection on side B of the housing. Convection cooling provides cost-effective heat dissipation for the motor. Other cooling options, like forced air cooling, are available for MAC motors, if required. The motor is equipped with a tacho generator and an optional encoder for feedback. Its centering diameter is 50 millimeters. A flange on the housing provides a method for secure installation. Protection rating of the motor housing is IP65.
Frequently Asked Questions about MAC041B-0-BS-4-E/050-B-0/WI668LV:
Q: Which feedback method does the motor support?
A: The motor supports tacho feedback.
Q: Is an optional encoder installed on the motor?
A: An optional encoder is installed on the motor.
Q: What is the centering diameter?
A: Centering diameter of the motor is 50 millimeters.
Q: What is the location of the power connection?
A: The power connection is located on side B of the motor.
Q: How can you mount MAC motors?
A: MAC motors are designed for flange mounting.
