Product Description:

The MAC041A-0-FS-4-E/050-A-1/WI652LV/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts electrical energy into controlled rotary motion while the connected drive electronics regulate velocity and position. The motor can operate small pick-and-place axes, indexing tables, and other automated mechanisms that require precise responses to analog commands. Its compact design is suitable for machinery where installation space is limited and low-latency motion is important.

The stator uses winding code FS, which indicates the electrical characteristics used by compatible Indramat amplifiers. Heat generated by the windings is removed through natural convection, eliminating the need for forced-air ducts or an external fan. The unit has a motor size of 041 and a motor length of A, providing a compact magnetic stack and housing footprint for flange-mounted applications. Power conductors exit through a connector on side A, allowing the incoming cable to be routed along the drive end while remaining clear of the feedback wiring. This cable orientation can also reduce interference with nearby machine components when the motor is installed in a confined axis assembly.

A standard blocking brake holds the shaft when the amplifier is disabled, helping prevent suspended or vertical loads from drifting. Position information is supplied through an incremental encoder with standard mounting, allowing the controller to monitor shaft movement and correct positioning errors during operation. The feedback arrangement supports tacho feedback with an incremental or absolute encoder, accommodating control systems that require velocity signals, relative position data, or stored position information. The brake operates independently of the encoder function, so shaft holding remains available when motion feedback is inactive. The motor’s self-cooling arrangement reduces auxiliary equipment around the axis, while its feedback connections provide the signals needed for closed-loop motion control. Its cable exit and compact frame also help preserve access to adjacent components within densely arranged automation equipment.