MAC041A-0-FS-3-E/050-B-1/S001
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911249923
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC041A-0-FS-3-E/050-B-1/S001 is a high-performance servo motor with a mass of 12.5 kg and a protection category of IP65. Manufactured by Bosch Rexroth Indramat, it is part of the MAC AC Servo Motors series, featuring a nominal motor speed of 3000 min-1. It has a continuous torque at standstill of 3.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC041A-0-FS-3-E/050-B-1/S001 Servo Motor, part of a renowned Bosch precision automation MAC AC Servo Motors series combines robust design with advanced features. It ensures reliable performance across demanding industrial automation applications, with flexible integration and durable shaft sealing technology.
The MAC041A-0-FS-3-E/050-B-1/S001 servo motor features a holding or blocking brake that can resist motion with a torque of 3 Newton-meters. It has a centering flange diameter of 50 mm, which is used for precise mechanical alignment when mounting the motor to a machine or gearbox and ensures consistent positioning and vibration control. The serial communication standards it follows are RS232 which is a simple point-to-point connection, typically for short distances and RS485 which supports multi-drop communication and is more robust over longer distances and noisy environments. The motor’s rated speed is 6000 revolutions per minute (RPM) which indicates the typical speed at which the motor is designed to operate under normal load and voltage conditions. The physical location of the power connector on the motor housing is side B which refers to the rear or opposite side of the output shaft. It has a protection level of IP65 which means it is dust-tight and protected against low-pressure water jets from any direction.
The MAC041A-0-FS-3-E/050-B-1/S001 AC servo motor comes with a built in tachogenerator (used for speed feedback) which produces 1.5 volts per 1000 RPM. It provides accurate speed monitoring and closed-loop control because of the inclusion of a tachofeedback device and also the second shaft end allows another mechanical device (e.g., an encoder, brake or coupling) to be mounted. The servo module output shaft includes a seal, preventing dust and moisture from entering the motor where the shaft exits the housing.
Frequently Asked Questions about MAC041A-0-FS-3-E/050-B-1/S001:
Q: How does the second shaft end benefit the MAC041A-0-FS-3-E/050-B-1/S001 motor?
A: The second shaft end allows integration of additional devices like encoders or brakes. This enhances flexibility in system configuration and monitoring.
Q: Why is tachofeedback essential in the MAC041A-0-FS-3-E/050-B-1/S001?
A: Tachofeedback ensures precise speed control and smooth motor operation. It's crucial for maintaining consistent motor performance under varying loads.
Q: What advantage does IP65 protection offer for this servo motor?
A: IP65 rating ensures protection against dust ingress and water jets. This increases motor durability in harsh or semi-outdoor industrial environments.
Q: How does RS485 improve data communication reliability over RS232?
A: RS485 supports longer cable lengths and multiple devices on the same bus. It minimizes signal degradation in noisy industrial settings.
Q: What is the purpose of the 50 mm centering diameter in this motor?
A: It allows precise mechanical alignment during installation. This results in reduced vibration and improved system stability.
