KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310560
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW is a motor-integrated servo drive in the KSM Motor Integrated Servo Drives series. It offers a continuous torque at standstill of 8.7 Nm, a maximum current of 17.7 A, and a rated power of 1240 W. The servo drive features SERCOS control communication, IP65 protection, and weighs 15.6 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW is a motor-integrated servo drive produced by Bosch Rexroth Indramat for the KSM Motor Integrated Servo Drives series. It combines a permanent-magnet servomotor and a digital drive in one housing, providing decentralized axis control for conveyors, packaging equipment, and handling stations. The unit is a basic performance model in series 1, design version 2, so it can be mounted close to the machine instead of requiring a separate motor and drive cabinet arrangement. This layout reduces field wiring length and supports closed-loop motion control directly at the axis.
Its continuous torque at standstill reaches 8.7 Nm, giving the axis holding capability for static loads during normal operation. During acceleration, the drive can produce up to 29.0 Nm, which supports short peak demands within the size 076, length C platform. The power stage provides a rated output of 1240 W and a maximum phase current of 17.7 A for normal motor operation. The copper windings generate 165 W of heat under nominal conditions, so the duty cycle must remain within the motor’s thermal limits. A torque constant of 1.85 Nm/A relates commanded current to shaft torque, which helps the servo control loop respond predictably. Short-circuit withstand capability is 42 kA rms for use on industrial feeders, and the housing uses a B05 flange with M10 mounting hardware tightened to 51 Nm.
Installation is supported by a mass of 15.6 kg, which keeps the unit substantial enough for rigid mounting without making placement difficult. The housing has an IP65 rating that protects the integrated electronics against dust and low-pressure water jets in machine environments. Command and feedback signals are transmitted over SERCOS, allowing deterministic communication between the axis and the higher-level control system. This arrangement suits decentralized machine layouts where the drive is mounted directly on the equipment. The integrated format also reduces the need for separate motor power and feedback cable runs between the cabinet and the axis.
Frequently Asked Questions about KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW:
Q: What is the continuous holding torque for the KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW servo drive?
A: The KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW has a continuous torque at standstill of 8.7 Nm.
Q: Which communication protocol does the KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW support?
A: This servo drive uses SERCOS for its control communication interface.
Q: What is the IP rating for the KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW integrated motor drive?
A: It is rated with an IP65 degree of protection against dust and water.
Q: What is the maximum torque output of the KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW?
A: The maximum torque that can be achieved by this model is 29.0 Nm.
Q: What is the rated power output of the KSM01.2B-076C-035N-M1-HP2-SE-NN-D7-NN-FW servo drive?
A: This model has a rated power output of 1240 W for standard applications.
