Product Description:

The KSM01.2B-071C-24N-M1-HP0-SE-NN-D7-NN-FW is a motor-integrated servo drive produced by Bosch Rexroth Indramat within the KSM Motor Integrated Servo Drives series. By uniting the motor, drive electronics, and feedback in one enclosure, it provides decentralized axis control for automated packaging cells, material-handling gantries, and small assembly stations. This configuration removes the need for a separate panel-mount drive, shortens cable runs, and simplifies setup in industrial automation environments.

Power for the unit is supplied from a DC 750 V link, allowing it to share a common bus with other drives on the machine. All power, signal, and safety lines are routed through a single Hybrid Connector, which simplifies installation and reduces enclosure bulk. Heat is dissipated through natural convection, so no fans or liquid lines are required. Position data is transferred over a Hiperface encoder interface, which supports connection to modern controllers without additional gateway hardware. The device is Design Version 2 with a standard mechanical option, uses motor size 071 with length C, and has winding code 24 for its basic performance level.

The optical feedback system resolves rotation into 128 signal periods per turn and tracks multiple revolutions through its multi-turn absolute capability, which supports accurate position retention after power cycles. Real-time axis commands travel over SERCOS 2 (RS422), providing deterministic communication for coordinated motion groups. Mechanical coupling to the load is through a shaft with a keyway, and a shaft seal is fitted to limit the ingress of dust and coolant. The motor is supplied without a holding brake, so external means must secure vertical loads when power is removed. Safety technology is not integrated, so higher-level safety circuits must be handled externally.