KDV1.3-100-220/300-220-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat KDV1.3-100-220/300-220-W1 is part of the KDV Supply Modules series and has a rated current of 100 Amps with a nominal input voltage of 220 VAC. It delivers a DC bus voltage of 300 VDC and is blower cooled, with a unit weight of 21 kilograms. The module provides 2 kW of continuous bleeder power, 8 A at 24 V output current, and a peak current of 300 Amps for up to 300 milliseconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDV1.3-100-220/300-220-W1 is a supply module manufactured by Bosch Rexroth Indramat for the KDV Supply Modules series. Intended for installation in control cabinets, the unit converts three-phase mains power into a regulated DC link and low-voltage auxiliary rails. By doing so, it provides the fundamental power infrastructure required by Indramat DDS or DKC servo drives, CNC controllers, and distributed I/O stations. Within industrial automation cells, this supply module enables coordinated multi-axis motion and rapid energy recovery during deceleration while supporting electrical protection functions.
It accepts a nominal input voltage of 220 VAC and delivers a stabilized link voltage of 300 VDC to each drive inverter attached to the bus. The converter section is rated for a continuous current of 100 A, while dynamic loads can draw up to 300 A for 300 ms; this headroom lets servo motors accelerate or brake suddenly without interrupting the mains supply. With a power capability of 30 kW, the module can supply multiple medium-frame motors. Two auxiliary rails provide ±15 V at 1.5 A and 24 V at 8 A, and the auxiliary supply capacity is 500 VA for encoders, contactors, and control electronics. By combining high-current DC with isolated low-voltage outputs, the module reduces wiring complexity and centralizes protective functions.
Excess kinetic energy is absorbed by an integrated bleeder rated for 2 kW continuous and up to 40 kW peak. Together with 60 kWs of permissible feedback, this helps prevent overvoltage on the 300 V bus during rapid deceleration. Forced-air cooling uses a blower that consumes 15 VA. The electronics add 150 W of cabinet heat, and another 2000 W can be removed externally, so the enclosure must provide adequate airflow. The housing weighs 21 kg, so the mounting panel must support that mass and limit vibration transfer from the fan.
Frequently Asked Questions about KDV1.3-100-220/300-220-W1:
Q: What is the nominal input voltage required for the KDV1.3-100-220/300-220-W1 supply module?
A: The KDV1.3-100-220/300-220-W1 operates with a nominal AC input voltage of 220 volts.
Q: How is the KDV1.3-100-220/300-220-W1 cooled during operation?
A: This supply module is blower cooled, requiring active airflow for temperature management.
Q: What is the rated current of the KDV1.3-100-220/300-220-W1 supply module?
A: The rated current output for this unit is 100 amps.
Q: What is the DC bus voltage output of the KDV1.3-100-220/300-220-W1?
A: It provides a DC bus voltage output of 300 VDC for connected devices.
Q: How much feedback energy can the KDV1.3-100-220/300-220-W1 handle?
A: The maximum feedback energy the module can absorb is 60 kilowatt-seconds.
