KDA 3.2-100-3-LYI-U1

Product Description:

The KDA 3.2-100-3-LYI-U1 is a drive module that comes straight from Bosch Rexroth Indramat’s set of KDA Spindle Drives, ready to handle steady work in automated lines. Down the middle, the core design uses a linear drive module and a ball screw drive, giving it a clean push that works for many tasks where a smooth linear motion matters. This setup gets a stroke length of 100 mm with a drive engineered for 3.2 m/s maximum speed, so travel happens fast but still with control. Repeatability doesn’t come up short either—this model promises ±0.01 mm accuracy for returns back and forth, keeping motion as predictable as any routine job asks for.

Electric setup is straightforward—this module gets along fine with a 24VDC or 48VDC power supply, no weird adapters or jumps needed. Mounting is open for both horizontal and vertical installation if the workspace changes. Motor contacts fit in on the left (marked LYI), and, for motion, it works off a servo motor (with the U1 tag showing variant). The built-in linear guide underneath gives everything support, so loads track straight, without wandering off during long cycles. With it built to achieve 30 m/s² acceleration, cut-and-move cycles don’t drag, letting automation get solid value out of each movement.

Protection in operation goes to IP20 or IP40 (depends what exact model’s chosen) and can handle moderate environments, nothing flashy but enough for most wiring or industrial cabinets. Max payload swings depending on the final hardware, but up to several kilos is possible due to the stable guide system and sturdy screw. At its base, the KDA 3.2-100-3-LYI-U1 sets up for industrial automation—pick-and-place, precise moves, system upgrades—anywhere getting consistent straight travel and high repeatability mean less rework.