KDA 3.2-100-3-LY0-U1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 3.2-100-3-LY0-U1 is a spindle drive from the KDA Spindle Drives series with a rated current of 100 Amps and operates on a DC supply voltage of 300 VDC. It uses forced cooling with a mounted heatsink blower powered at 115V, 50-60Hz, and includes a SERCOS speed command interface along with a second encoder input.
Internal Product Review
The KDA 3.2-100-3-LY0-U1 spindle drive from Bosch Rexroth Indramat features a rated current of 100 A and operates with a 300 VDC supply voltage, making it well-suited for demanding spindle applications. Its forced cooling system uses a mounted heatsink blower powered by a 115V/50-60Hz AC source, effectively maintaining optimal temperatures during operation. This drive is a reliable choice for high-performance spindle control in industrial environments.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 3.2-100-3-LY0-U1 belongs to the KDA Spindle Drives series from Bosch Rexroth Indramat. As a spindle drive, it supplies controlled three-phase power to high-speed machine-tool motors, allowing CNC systems to vary spindle speed and torque during cutting, drilling, or grinding cycles. This type of control helps the spindle respond smoothly to changing load conditions during acceleration, steady machining, and deceleration. It also supports stable speed regulation during rapid spindle ramp changes. Its integrated heat sink blower and internal logic make it a compact cabinet module for dedicated spindle regulation where a separate external cooling assembly is not required.
The power stage is energized from a DC bus rated at 300 VDC, and it can deliver a continuous output of 100 A to the connected spindle motor. A separate blower circuit operates from 115 V/50–60 Hz, keeping the mounted heat sink actively ventilated during heavy cutting loads. The unit uses forced cooling, so airflow is produced by the onboard fan rather than by natural convection. Thermal design supports operation within an ambient temperature range of 5 to 45 °C. Stable heat removal helps the power semiconductors remain within their intended operating range during long machining cycles. The control board converts incoming speed commands into precise current vectors for accurate spindle regulation and repeatable response.
The mechanical chassis may be mounted at elevations up to 1000 m above sea level without derating, supporting use in most industrial regions. Velocity references are transmitted through the SERCOS interface, which allows the spindle axis to exchange real-time command data with the machine control. High-resolution rotor feedback is accepted through a second encoder input that can be synchronized with the primary channel for dynamic spindle orientation and monitored positioning functions. The configuration includes no additional interface option, which reduces wiring complexity when no fieldbus extension or analog velocity loop is required.
