KDA 3.2-050-3-LY0-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 3.2-050-3-LY0-W1 is a spindle drive in the KDA Spindle Drives series, designed for forced cooling with a mounted heatsink blower operating on 220V AC at 50-60Hz. It features a rated current of 50 Amps, runs on a 300 VDC supply voltage, and includes a second encoder input with synchronous input along with a SERCOS speed command interface.
Internal Product Review
The KDA 3.2-050-3-LY0-W1 spindle drive from Bosch Rexroth Indramat features a rated current of 50 A and utilizes a DC supply voltage of 300 VDC for high-performance spindle control. Its forced cooling system with a mounted heatsink blower ensures stable operation within an ambient temperature range of 5 to 45 degrees Celsius. This spindle drive is well-suited for demanding automation environments requiring dependable cooling and precise control.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 3.2-050-3-LY0-W1 spindle drive is produced by Bosch Rexroth Indramat for the KDA Spindle Drives series. It is a Series 3, Version 2 unit that serves as the regulating amplifier for high-speed machine-tool spindles. By converting common DC-bus energy into a controlled three-phase output, the drive maintains constant torque and speed during cutting, drilling, or grinding cycles. In typical automation cabinets, it works with matching power supplies and feedback devices to close the velocity loop on asynchronous or synchronous spindle motors.
Its continuous output capability is 50 A, allowing the connected spindle motor to draw substantial armature current without derating under nominal cutting loads. The internal power section is fed from a 300 VDC bus, so the DC link must be sized correctly for stable regeneration and braking. Thermal management is handled by a mounted heat sink blower that forces air directly across the IGBT modules. This arrangement uses forced cooling to sustain full current even in enclosed cabinets. The blower itself is supplied from a dedicated 220 V/50-60 Hz single-phase tap, which separates auxiliary ventilation from the main logic supply.
Velocity references arrive over the SERCOS interface, enabling deterministic setpoint updates from the CNC controller. For precision orientation tasks, the drive includes a second encoder input and a synchronous input, letting it reconcile spindle position with external master axes. Reliable operation is permitted between 5 to 45 °C, and installation altitude can reach 1000 m above sea level before nominal ratings must be reduced. Because there is no additional interface option, wiring is limited to the standard control, encoder, and power terminals used on this model. This keeps cabinet connections straightforward and avoids unused interface points.
