KDA 3.1-150-3-A0S-U1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat KDA 3.1-150-3-A0S-U1 is a spindle drive from the KDA Spindle Drives series. It features a rated current of 150 Amps, operates with a 300 VDC supply voltage, and uses a mounted heatsink blower for forced cooling. The drive supports an ambient temperature range of 5 to 45 degrees Celsius and includes a serial interface (RS 232 C) for communications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 3.1-150-3-A0S-U1 is a regulated power module manufactured by Bosch Rexroth Indramat within the KDA Spindle Drives series. As a spindle drive, it converts a fixed DC link into controlled three-phase output that regulates the torque and speed of high-speed machining spindles used in metal-cutting and forming centers. By accepting analog speed commands from the CNC controller, the device provides the closed-loop velocity control needed for repeatable surface finish and consistent tool life in automated production cells. This type of control is useful in machining processes where spindle speed must remain stable as cutting load changes during drilling, milling, or grinding.
Its power section operates from a stabilized bus of 300 VDC, allowing the internal inverter to deliver up to 150 A of continuous motor current without derating. Speed reference enters the control board as an analog voltage, while setup and diagnostic data move through a serial RS-232C interface that can be connected directly to a service terminal. The serial link supports parameter access and status monitoring without requiring a separate fieldbus connection. The unit belongs to design level 3 of the series, and it lacks a second encoder input, so position feedback is expected only from the primary spindle encoder. An auxiliary supply of 115 V at 50/60 Hz feeds the heat sink blower that removes switching losses from the power stage during sustained high-load operation.
Thermal management relies on forced cooling that channels air through a mounted heat sink blower attached to the aluminum extruded frame. This arrangement maintains semiconductor junction temperatures within limits when the cabinet ambient stays between 5 to 45 °C. Performance values remain valid up to 1000 m above sea level, and installations beyond this height may require reduced load because thinner air removes less heat. Adequate airflow around the heat sink helps the module maintain stable operation during continuous spindle duty and prolonged cutting cycles.
Frequently Asked Questions about KDA 3.1-150-3-A0S-U1:
Q: What cooling method is used in the KDA 3.1-150-3-A0S-U1 spindle drive?
A: The KDA 3.1-150-3-A0S-U1 spindle drive uses a mounted heatsink blower for cooling.
Q: What is the rated current of the KDA 3.1-150-3-A0S-U1 spindle drive?
A: The rated current for this model is 150 A, providing high current output for heavy-duty applications.
Q: What voltage and frequency does the AC source for the heatsink blower require on this spindle drive?
A: The AC source for the heatsink blower operates at 115V and supports both 50 and 60 Hz.
Q: What is the permitted ambient temperature range for operation of the KDA 3.1-150-3-A0S-U1?
A: The product is designed to function within ambient temperatures from 5 to 45 degrees Celsius.
Q: What DC supply voltage is required for the KDA 3.1-150-3-A0S-U1 spindle drive?
A: This spindle drive is compatible with a DC supply voltage of 300 VDC.
