KDA 3.1-150-3-A00-U1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 3.1-150-3-A00-U1 is a spindle drive from the KDA Spindle Drives series with a rated current of 150 Amps and a DC supply voltage of 300 VDC. It uses forced cooling through a mounted heatsink blower that operates at 115V and 50-60Hz, and is suitable for installation up to 1000 meters above sea level. The drive accepts analog speed command values and is designed for ambient temperatures between 5 to 45 degrees Celsius.
Internal Product Review
The KDA 3.1-150-3-A00-U1 spindle drive from Bosch Rexroth Indramat delivers strong performance with a rated current of 150 A and a 300 VDC supply voltage. Its forced cooling system uses a mounted heatsink blower powered at 115V/50-60Hz for enhanced thermal management. Designed for reliable operation, this unit excels in demanding spindle control applications up to 1000 meters elevation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 3.1-150-3-A00-U1 is a spindle drive produced by Bosch Rexroth Indramat for the KDA Spindle Drives series. As a closed-loop power module, it interfaces with Indramat drive controllers to regulate high-speed machining and grinding spindles. Unlike a simple power stage, it adjusts motor current in response to command and feedback signals so the spindle can maintain the requested speed during changing cutting loads. This makes the unit suitable for machine tools that need smooth acceleration, stable rotation, and consistent response during automated operation.
This unit operates from a DC bus of 300 VDC and can deliver a continuous output of 150 A to the motor windings, giving it capacity for rapid acceleration under load. Thermal management relies on a mounted heat sink blower powered by a separate 115 V at 50/60 Hz source. The blower is part of the drive's forced cooling system, which helps keep the power semiconductors within their operating temperature range during extended duty cycles. The cooling arrangement supports operation in ambient conditions from 5 to 45 degrees Celsius without requiring a change in the stated temperature range.
Site conditions can include elevations up to 1000 m above sea level without affecting normal operation. Speed reference data reach the drive through an analog command channel, which supports integration with legacy motion controllers while allowing precise scaling of the setpoint. The unit has no additional interface option, so auxiliary I/O or fieldbus communication must be provided by the system controller. It also does not include a second encoder connection, so redundant feedback must be handled elsewhere in the system. The drive is part of Series 3, which uses the mechanical footprint and connector style assigned to this generation of KDA modules.
