KDA 3.1-100-3-DY0-U1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 3.1-100-3-DY0-U1 is a spindle drive from the KDA Spindle Drives series and features forced cooling with a mounted heatsink blower powered by a 115V AC source. It supports a rated current of 100 Amps, operates on a 300 VDC supply voltage, and functions efficiently in ambient temperatures from 5 to 45 degrees Celsius. This drive includes a second encoder input with synchronous input and accepts 16-bit parallel digital speed command values.
Internal Product Review
The KDA 3.1-100-3-DY0-U1 spindle drive from Bosch Rexroth Indramat stands out with its 100 A rated current and a 300 VDC supply voltage, ensuring strong performance for demanding spindle applications. Forced cooling with a mounted heatsink blower and a 115V/50-60Hz AC source maintains stable operation even in continuous use. This model is ideal for installations up to 1000 meters above sea level, combining reliable control with a digital 16-bit parallel speed command interface.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 3.1-100-3-DY0-U1 is a spindle drive module produced by Bosch Rexroth Indramat within the KDA Spindle Drives series. It serves as the power stage between a machine controller and an AC spindle motor, converting energy from the common DC bus into controlled three-phase output while monitoring speed feedback. In automated machining cells, the module supports closed-loop spindle positioning and controlled acceleration for milling, drilling, and turning equipment. Because it works from a shared DC link, it fits machine architectures that centralize incoming power and distribute it to individual axes.
The drive uses a regulated link voltage of 300 VDC, and its power section is rated for a continuous output of 100 A, allowing medium-frame main spindles to operate without derating. An internal auxiliary supply of 115 V/50-60 Hz powers the heat sink blower, so the cooling hardware remains electrically separate from the DC bus during operation. Thermal management uses forced cooling, and the unit is intended for ambient temperatures from 5 to 45 °C when cabinet airflow is maintained. This arrangement supports continuous spindle service in enclosed machine cabinets where stable semiconductor temperature is important for repeatable operation.
For installation, the unit includes a mounted heat sink blower that directs airflow across the IGBT stack and removes the need for external ducting. The cooling system is suitable for cabinet locations up to 1000 m above sea level, so normal industrial installations at moderate altitude can use the drive without a separate air-handling assembly. Command data reach the drive through a 16-bit digital parallel speed channel, which gives the controller a direct path for reference values. Rotor position can be evaluated through a second encoder input and synchronous input when resolver and incremental feedback signals must be processed at the same time. The separate command and feedback paths allow the drive to coordinate spindle motion with indexed and synchronized machine functions.
