KDA 3.1-050-3-AY0-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 3.1-050-3-AY0-W1 is a spindle drive in the KDA Spindle Drives series. It features a rated current of 50 Amps and operates with a DC supply voltage of 300 VDC. The drive uses forced cooling with a mounted heatsink blower powered by a 220V AC source and supports ambient temperatures from 5 to 45 degrees Celsius.
Internal Product Review
The KDA 3.1-050-3-AY0-W1 spindle drive from Bosch Rexroth Indramat delivers efficient power handling with a rated current of 50 A and a DC supply voltage of 300 VDC. Its forced cooling system, utilizing a mounted heatsink blower operating at 220V/50-60Hz, ensures thermal stability during demanding operations. This drive stands out for its reliable performance in high-usage spindle applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the KDA 3.1-050-3-AY0-W1 as part of the KDA Spindle Drives series. This spindle drive regulates high-speed, high-power motors used on machining centers and other automated tools, translating controller commands into precise spindle motion while managing heat through an integral blower. By integrating the power electronics, cooling hardware, and encoder interfaces in one housing, the unit simplifies cabinet layout and supports coordinated multi-axis operation in industrial automation. It is suited for applications where spindle speed must follow command changes smoothly during cutting, drilling, and similar machining processes.
The drive is energized by a DC bus of 300 VDC, giving the power stage the headroom needed for rapid torque changes without exceeding insulation limits. Its inverter section is rated to supply 50 A of continuous armature current, providing adequate margin for cutting loads and acceleration profiles. Speed reference data enters through an analog command channel, allowing ±10 V control signals from legacy or modern CNC platforms. Thermal energy generated in the IGBTs is removed by a mounted heat sink blower; airflow is directed across the fins to keep semiconductor junction temperatures within limits. Because the blower operates in forced cooling mode, heat rejection remains stable even when cabinet ventilation is limited. This cooling arrangement supports consistent spindle response during extended machining cycles.
The blower itself is supplied from an auxiliary line of 220 V/50–60 Hz, isolating its power draw from the DC link and ensuring startup at low spindle speeds. Ambient conditions allow continuous duty between 5 to 45 °C, so the drive can operate in typical factory environments without derating. Installation is permitted up to 1000 m above sea level; above this height, reduced air density can lessen convective performance. The drive also includes a second encoder input and a synchronous input, which let the controller monitor motor position and a spindle-mounted encoder at the same time. This supports synchronized spindle functions and closed-loop coordination with related machine axes.
