KDA 2.1-050-3-A00-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KDA 2.1-050-3-A00-W1 is a spindle drive in the KDA Spindle Drives series with a rated current of 50 Amps and a DC supply voltage of 300 VDC. It features forced cooling with a mounted heatsink blower powered by a 220V, 50-60Hz AC source and is suitable for ambient temperatures from 5 to 45 degrees Celsius. The drive accepts analog speed command values and supports installation at elevations up to 1000 meters above sea level.
Internal Product Review
The KDA 2.1-050-3-A00-W1 is a Bosch Rexroth Indramat spindle drive designed for demanding industrial applications, featuring a 50 A rated current and 300 VDC supply voltage. Its forced cooling system with a mounted heatsink blower ensures stable operation within a 5 to 45 degrees Celsius ambient temperature range. This drive stands out for efficient performance and reliable thermal management.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KDA 2.1-050-3-A00-W1 spindle drive is built by Bosch Rexroth Indramat as part of the KDA Spindle Drives series. This unit forms the link between the DC bus and a high-speed spindle motor, supplying regulated three-phase power while monitoring thermal and electrical limits. Within automated machining cells and transfer lines, the drive controls spindle speed and torque so cutting, drilling, or grinding operations follow programmed CNC profiles with repeatable accuracy. Its control loop is intended for spindle service where accurate speed regulation affects surface finish, tool life, and process consistency.
The drive’s thermal management relies on an auxiliary blower that runs from 220 V/50–60 Hz, so blower operation stays independent of DC bus variation. Internally, a bus link of 300 VDC feeds the inverter stage that generates the motor voltage. The power stage is rated for 50 A continuous output, which supports sustained spindle loading without immediate current derating. Heat produced by switching losses is extracted through a mounted heat sink blower, and the airflow method uses forced cooling because cabinet convection alone is not sufficient. This arrangement helps stabilize the temperature of the power semiconductors during long operating periods, especially when spindle demand stays high for extended machining cycles.
The permitted ambient range of 5–45 °C allows installation on shop floors that are conditioned but not fully climate-controlled. Operation above 1000 m above sea level is not supported because thinner air reduces cooling effectiveness. Speed references are accepted as an analog voltage signal, which supports connection to CNC controls that use simple command wiring rather than digital fieldbus control. This control format suits established machine platforms that already provide spindle commands through standard analog outputs. The unit has no additional interface option and no second encoder socket, so expansion slots remain unused and the connection layout stays straightforward.
