Product Description

The KCU02.2N-ET-ET-025-NN-N-NN-MW Bosch Rexroth drive connection box is compatible with only the manufacturer's range of offerings. This connection box can be operated only after mounting a touch guard. The product supplies the KSM and KMS servo drives with 42 V control voltage. This device has a fixed configuration. The unit encompasses LEDs on its front panel for diagnostics purposes. Its type plate is positioned above the UL performance data plate. This connection box is completely backward compatible with its earlier version. The product portrays 2K3 climatic category according to IEC 721 specifications for storage. This device encompasses electrolytic capacitors that tend to deteriorate during its storage period. The unit should be protected against conductive dirt contamination on its surface. It must never be operated at an altitude higher than 4000 m over sea level. This connection box supports only G1 mounting orientation. The product has two fuse outputs with 30 A current rating on its front panel. This device can be connected to a neighboring device by using the joint bar equipment grounding conductor. The unit must have a connection at all its connecting points for the safe and correct functioning of the drive. This drive connection box must be used with a control cabinet adapter when it is connected to the manufacturer's HMV01 and HCS03 devices. Its hybrid cable must always be connected to the X103.1 connecting point of the first servo drive. The product supports up to 50 plugging cycles for its hybrid cable. This device is not needed when a KMV power supply or a HCS01 converter is used. It is necessary to place the servo drive with the highest power as close as possible to the output of the connection box.