IKL0263 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
48 Seconds
The Bosch Rexroth Indramat IKL0263 belongs to the IKL Control Cables series and features a PUR jacket in RAL 2003 orange with oil resistance and halogen-free properties. This cable has an outer diameter of 17.5 mm, supports power conductors of 4 x 10.0 mm², and has connector power contacts of 3 plus PE with solder type connections. The maximum wire temperature is 80 °C and it is not suited for drag chain use.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKL0263 cable is supplied by Bosch Rexroth Indramat as part of the IKL Control Cables series. It links servo drives to associated power modules and feedback interfaces in industrial automation, transferring both motor current and auxiliary control signals in a single routed assembly. By combining power and signal paths, the cable reduces panel wiring time and maintains deterministic performance between the drive and the controlled axis.
The connector on the drive side carries control wiring through 7 × 1.5 mm² contacts, while motor voltage is delivered through 3 + PE power pins that are terminated with a Solder joint to secure low-resistance paths. Primary phase conductors inside the sheath are rated at 4 × 10.0 mm², providing cross-sectional area for continuous current without excess heating. An overall diameter of 17.5 mm defines gland size and routing space, so conduit and clamp hardware can be selected accurately. These figures establish the electrical capacity and mechanical footprint of the cable in closed-loop motion systems.
Environmental and installation limits complete the specification. The outer jacket is coloured RAL 2003 (Orange) for clear field identification and made of PUR, a material that withstands cutting fluids and abrasion while remaining halogen-free to minimise toxic emission during fire. Conductor insulation stays stable up to 80 °C, and the assembly can be laid with a fixed bending radius of 4 × D to prevent copper fatigue. Oil resistance is present, so the cable endures hydraulic-media spray, yet it is not intended for drag-chain motion and should remain in static runs. No separate control conductors are routed beyond the designated signal cores, simplifying pinout mapping.
Frequently Asked Questions about IKL0263:
Q: What is the outer diameter of the Bosch Rexroth Indramat IKL0263 control cable?
A: The IKL0263 cable has an outer diameter of 17.5 mm, making it suitable for applications requiring medium thickness wiring.
Q: Is the IKL0263 cable halogen-free for safety in case of fire?
A: This cable is halogen-free, allowing safer use in environments where toxic emissions from burning cables must be avoided.
Q: What material is used for the jacket on the IKL0263 cable from Bosch Rexroth Indramat?
A: The jacket of this cable is made from PUR, providing durability and flexibility in industrial use.
Q: What is the maximum wire temperature rating for the IKL0263 cable?
A: The maximum wire temperature the IKL0263 cable can handle is 80 °C.
Q: How many power conductors are present in the Bosch Rexroth Indramat IKL0263 cable and what is their size?
A: The IKL0263 features four power conductors each with a cross-section of 10.0 mm², enabling high-capacity power transmission.
