HNF01.1A-P2K0-R1200-A-480-NNNN/S148 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911316038
Ask for AvailabilityThe Bosch Rexroth Indramat HNF01.1A-P2K0-R1200-A-480-NNNN/S148 is part of the HNF Mains Filters series. It offers EMC Category C3 performance in accordance with DIN EN 61800-3 and has a degree of protection rated at IP20. The filter operates with a mains connection voltage of 3 × AC 400 to 480V, 50/60 Hz, and is designed for regenerative devices only.
Internal Product Review
The HNF01.1A-P2K0-R1200-A-480-NNNN/S148 is a Bosch Rexroth Indramat HNF mains filter designed for regenerative devices. IP20 protection and EMC Category C3 compliance in accordance with DIN EN 61800-3 support clean integration and dependable noise suppression in drive systems. The 3 × AC 400 to 480 V, 50/60 Hz input range makes the unit a strong choice for stable mains conditioning.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HNF01.1A-P2K0-R1200-A-480-NNNN/S148 is a mains filter produced by Bosch Rexroth Indramat and assigned to the HNF Mains Filters series. The unit is installed between a plant's three-phase supply and regenerative drive controllers to attenuate conducted interference on the line side. By limiting high-frequency noise and returning energy smoothly to the grid, the filter helps protect upstream components and supports electromagnetic compatibility in regenerative drive systems. This placement also helps keep switching noise from the drive side from being fed directly back into the facility power network.
The housing carries a protection rating of IP20, meaning fingers are guarded but the device must be mounted inside a cabinet. Because of this enclosure rating, it is not intended for exposed mounting where direct contact or contaminant entry can occur. The incoming supply can range from 3 x AC 400 to 480 V (-15% to +10%), 50/60 Hz, so one filter can serve common low-voltage industrial networks with allowance for line variation. When wired into a system, it satisfies EMC class C3, which is intended for industrial locations supplied through dedicated transformer feeds. The unit uses Design Version 1 for its current mechanical layout and terminal assignment. The internal choke-capacitor network is rated for regenerative devices only, so it is intended for drives that return energy to the supply.
The product code Series 01 identifies the electrical topology used by this filter. Compliance extends to DIN EN 61800-3, allowing emission performance to be documented for industrial installations. The designation HNF Mains Filters places the unit in a product line intended for comparable switching frequencies and regenerative operation. Mounting hole patterns, wiring accessories, and recommended protection devices follow the conventions used across this filter line. Using the same filter line also helps keep cabinet layout, connection spacing, and protective-device choices aligned within the installation.
