HNF01.1A-F240-E0125 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306437
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
57 Seconds
The Bosch Rexroth Indramat HNF01.1A-F240-E0125 is part of the HNF Mains Filters series and is designed for feeding devices only, with a nominal current of 125 Amps and peak current of 188 Amps. This filter is suitable for up to six axes with a maximum cable length of 240 meters and features IP20 protection. It has dimensions of 150 mm width, 262 mm depth, 440 mm height, and weighs 18 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HNF01.1A-F240-E0125 mains filter is produced by Bosch Rexroth Indramat and belongs to the HNF Mains Filters series. It is installed between the facility mains and the drive in multi-axis automation so line-borne interference is attenuated before it reaches the servo inverters. The unit is rated for systems with up to six axes and a combined motor-cable length of 240 m. It is intended only for feeding connected drive devices and not for self-contained loads.
This filter carries a continuous load of 125 A and can tolerate brief surges up to 188 A, allowing drives to pass through short acceleration peaks without saturating the filter core. Conducted emissions are classified as C3 in accordance with DIN EN 61800-3, so it is suited for industrial grids where the supply transformer is dedicated to power-conversion equipment. The housing meets protection class IP20, meaning live parts are finger-safe when the cabinet door is open. The assembly rises to 440 mm, while the width is 150 mm and the depth is 262 mm. These dimensions help leave cabinet clearance around the M10 × 30 ground stud, which must be tightened to 25 Nm. Line-side leakage stays below 2.2 A, and cable lugs up to 50 mm² can be connected to the terminals, which require 8 Nm of tightening torque.
The filter weighs 18 kg, so the mounting rails or backplate must support that static load as well as normal vibration margins. Insulation resistance toward the enclosure is greater than 15 MΩ, which limits capacitive discharge when the system is offline. Internal components dissipate less than 127 W under nominal current, and that value is useful when cabinet ventilation is planned. The design version is 1, the series code is 01, and the capacitors and chokes tolerate input fluctuations of ±10 % from the nominal line voltage without derating.
Frequently Asked Questions about HNF01.1A-F240-E0125:
Q: What is the nominal current rating for the HNF01.1A-F240-E0125 mains filter?
A: The HNF01.1A-F240-E0125 supports a nominal current of 125 A for reliable filtering in power supply applications.
Q: What is the maximum cable length supported by the HNF01.1A-F240-E0125 filter?
A: This model is designed for cable lengths up to a maximum of 240 meters, suitable for systems with 6 axes.
Q: Which EMC category does the HNF01.1A-F240-E0125 meet?
A: The filter complies with EMC Category C3 as per DIN EN 61800-3 standards.
Q: What protection category does the HNF01.1A-F240-E0125 offer?
A: It features a protection category of IP20, which provides basic protection against solid objects.
Q: What is the line-side leakage current for the HNF01.1A-F240-E0125?
A: The line-side leakage for this filter is less than 2.2 A, helping to minimize current leakage to earth.
