HNF01.1A-F240-E0051 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307937
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
21 Seconds
The Bosch Rexroth Indramat HNF01.1A-F240-E0051 is part of the HNF Mains Filters series and weighs 15 kilograms. It features a continuous current of 51 amps, peak phase current of 77 amps, and supports up to six axes with a maximum cable length of 240 meters. The filter has IP20 protection, an EMC category C3 according to DIN EN 61800-3, and power dissipation under 89 watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HNF01.1A-F240-E0051 is a line-side mains filter manufactured by Bosch Rexroth Indramat for the HNF Mains Filters series. It is integrated into multi-axis drive cabinets to attenuate conducted noise on power lines so that motion controllers meet EMC limits. A single unit can service six axes with a total motor cable length up to 240 m, and it is specified for feeding devices only within the drive system. This model carries internal design version 1 and is identified within series 01; its performance is classified under EMC category C3 according to DIN EN 61800-3 for industrial environments.
The filter supports a continuous phase current of 51 A, permitting sustained operation of the connected converters, while short bursts up to 77 A accommodate dynamic load peaks without saturation. Input and output leakage currents are each kept below 2 A, so upstream residual current devices are not unnecessarily tripped. Internal losses remain below 89 W at rated load, which minimizes thermal rise inside the cabinet during continuous operation. The insulation design keeps resistance above 15 MOhm to help prevent leakage between conductive paths even in humid production areas. Cable terminations accept rigid conductors up to 25 mm² or flexible conductors up to 16 mm², and the terminal screws are tightened to 4.8 Nm to secure low-impedance connections.
The steel housing is protected to IP20, allowing installation inside a closed control panel without additional sealing. The footprint measures 262 mm in depth, 100 mm in width, and 440 mm in height, so panel layouts can reserve a slender vertical slot next to the converter stack. With a mass of 15 kg, the unit is suited to fixed cabinet mounting and is secured with M6×16 mounting screws tightened to 2.3 Nm. Final electrical connections are made on the dedicated terminal bar.
Frequently Asked Questions about HNF01.1A-F240-E0051:
Q: What is the maximum number of axes and cable length supported by the HNF01.1A-F240-E0051 mains filter?
A: The HNF01.1A-F240-E0051 is designed for use with up to 6 axes and a maximum cable length of 240 meters.
Q: What are the continuous and peak current ratings for the HNF01.1A-F240-E0051 mains filter?
A: This model handles a continuous current of 51 A and can withstand peak phase currents up to 77 A.
Q: Which EMC category does the HNF01.1A-F240-E0051 filter comply with?
A: The HNF01.1A-F240-E0051 is classified under EMC Category C3 as per DIN EN 61800-3 standards.
Q: What is the protection category rating of the HNF01.1A-F240-E0051?
A: This mains filter has an IP20 protection category, meaning it is protected against solid objects over 12.5 mm but not against water.
Q: What is the maximum allowable conductor size for the HNF01.1A-F240-E0051 filter's terminals?
A: The maximum conductor cross-section for rigid conductors is 25 mm², while for flexible conductors it is 16 mm².
