HLR01.1N-11K0-N07R3-A-007-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306873
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
43 Seconds
The Bosch Rexroth Indramat HLR01.1N-11K0-N07R3-A-007-NNNN is part of the HLR Brake Resistors series and has a continuous power rating of 11 kW with a peak power of 82 kW for up to 13 seconds. It offers an energy absorption capacity of 1056 kWs, features IP20 protection, and weighs 22 kg. The resistor's dimensions are 600 mm in width, 270 mm in height, and 490 mm in depth, with a connection cross-section of 25 mm² and a resistance of 8.2 Ohms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HLR01.1N-11K0-N07R3-A-007-NNNN brake resistor is manufactured by Bosch Rexroth Indramat as part of the HLR Brake Resistors series. Installed on the DC link of Indramat drive packages, the unit provides a thermal sink that converts regenerative energy released during braking, direction reversals, or gravity-assisted moves into heat. By keeping the link voltage below the drive’s allowable threshold, the resistor helps protect automation lines such as gantry systems, packaging machines, and handling robots from unplanned shutdowns.
Its continuous thermal loading capacity reaches 11 kW, meaning it can dissipate that amount of power indefinitely without exceeding its steady-state temperature limit. During emergency or rapid stops, the resistor tolerates a peak load of 82 kW for up to 13 s, after which the element must cool. The stainless fin assembly can absorb 1056 kWs of energy per braking event, which helps match the braking load to the resistor’s thermal mass. Electrical resistance is fixed at 8.2 Ω, establishing a predictable current draw when connected across the 700 V class DC bus. An aluminum terminal block accepts conductors sized to an AWG 3 wire gauge so installation current paths remain within permitted ampacity.
The resistor measures 600 mm in width, 490 mm in depth, and 270 mm in height, which affects cabinet layout and clearance. Its enclosure is rated IP20, so it should be mounted inside an enclosed panel where fingers and tools are kept clear of the hot surface. The module weighs 22 kg, and that mass increases its thermal time constant, allowing longer pulses before temperature rise reaches cutoff. Power lugs accept a cross-section of 25 mm², supporting low connection resistance and reliable heat transfer to external cables. Adequate spacing around the fins lets cabinet airflow sustain continuous loading without exceeding drive-system temperature limits.
Frequently Asked Questions about HLR01.1N-11K0-N07R3-A-007-NNNN:
Q: What is the continuous power rating of the HLR01.1N-11K0-N07R3-A-007-NNNN brake resistor?
A: The HLR01.1N-11K0-N07R3-A-007-NNNN brake resistor can handle a continuous power of 11 kW during normal operation.
Q: How much peak power and duration can the HLR01.1N-11K0-N07R3-A-007-NNNN brake resistor handle?
A: This model is designed with a peak power capability of 82 kW for up to 13 seconds.
Q: What is the total energy absorption capacity of this brake resistor?
A: The HLR01.1N-11K0-N07R3-A-007-NNNN has an energy absorption rating of 1056 kWs, allowing it to dissipate substantial energy surges.
Q: What level of environmental protection does the HLR01.1N-11K0-N07R3-A-007-NNNN brake resistor provide?
A: The resistor features a protection class of IP20, which offers limited protection against solid objects but not liquids.
Q: What resistance value and wire size does the HLR01.1N-11K0-N07R3-A-007-NNNN support?
A: It uses an 8.2 Ohm resistance value with wiring supported up to a cross-section of 25 mm² (AWG 3).
