Product Description:

The HDS05.2-W300N-HA06-01-FW is a programmable drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. Installed inside a DIAX04 multi-axis cabinet, it acts as the power and regulation module that links motion commands from a higher-level CNC or PLC to connected servo motors. The unit converts reference values into controlled motor current so the drive can regulate position, speed, and torque during machine operation. In automated machining centers, packaging lines, and printing presses, this supports coordinated axis motion with repeatable response.

The device accepts analog reference levels through the Command Communication Interface, enabling straightforward ±10 V speed or torque control without fieldbus overhead. It belongs to the DIAX04 controller family, so its diagnostic LEDs, SERCOS loop connectors, and mounting rails align with companion modules in the same rack. The power section is rated for 300 A, allowing substantial transient motor current during acceleration. Thermal energy is removed by a built-in air blower that forces cabinet air across the IGBT heat sink. The product is part of Line 05, which matches 300 mm high back-plane slots.

The controller is Version 2 and uses the identifier 01 for this configuration. These codes identify the revision level used for this unit within the product line and distinguish this coded arrangement from earlier releases. The module is intended for cabinet-mounted servo systems that need regulated current output and coordinated axis response across connected drives. Its role in the rack is to provide the controlled power stage for applications where precise axis behavior must be maintained through changing loads and repeated operating cycles. This makes it suitable for multi-axis machines that rely on stable current control during continuous operation.