HDS05.2-W300N-HS28-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
22 Seconds
The Bosch Rexroth Indramat HDS05.2-W300N-HS28-01-FW is a drive controller in the HDS Drive Controllers series, belonging to the DIAX04 controller family. It features a SERCOS command communication interface and is equipped with a built-in internal air blower for cooling. The controller operates with a rated current of 300 Amps and is a line 05, version 2 product.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS05.2-W300N-HS28-01-FW is a drive controller produced by Bosch Rexroth Indramat. Designed for rack mounting beside supply modules, it converts DC bus energy into regulated three-phase output while executing axis commands from a central motion processor. Within an automated cell, it positions servo motors, monitors feedback, and carries out safety shutdowns so the electrical drive system follows the commanded motion profile. This type of controller is used in centralized servo systems where power conversion and axis regulation are handled inside a common cabinet.
In operation, the controller exchanges cyclic setpoints and diagnostic data over the SERCOS fiber-optic ring, which serves as its command communication interface. Within the DIAX04 drive family, this module can be used on axes that draw up to 300 A of continuous current. Thermal management is handled by a built-in air blower, so cabinet airflow moves through the heat sink without external ducting. This cooling method supports sustained operation during demanding motion cycles, and the control section continues to process feedback signals while the power stage supplies the motor.
The controller is part of the HDS Drive Controllers series and is identified as Line 05 with version 2. These identifiers indicate the product line and release level used for the module. The line and version correspond to the established electrical interface used by this controller class, which supports consistent integration with compatible supply and feedback components. The same platform is commonly applied in packaging, printing, and material-handling equipment where large servo axes require coordinated current, speed, and position control. Its module layout is intended for use with matching rack components so the controller fits into a DIAX04 cabinet assembly without unrelated external hardware.
Frequently Asked Questions about HDS05.2-W300N-HS28-01-FW:
Q: What command communication interface does the HDS05.2-W300N-HS28-01-FW support?
A: The HDS05.2-W300N-HS28-01-FW uses a SERCOS communication interface for command input and control.
Q: What type of cooling method does the HDS05.2-W300N-HS28-01-FW use?
A: This model is equipped with a built-in internal air blower for cooling during operation.
Q: What is the rated current of the HDS05.2-W300N-HS28-01-FW controller?
A: The rated current for this drive controller is 300 A, supporting high power applications.
Q: To which controller family does the HDS05.2-W300N-HS28-01-FW belong?
A: The HDS05.2-W300N-HS28-01-FW belongs to the DIAX04 controller family.
Q: What version is the HDS05.2-W300N-HS28-01-FW drive controller?
A: This HDS drive controller is Version 2, as indicated by its model specification.
