Product Description:

The HDS05.2-W300N-HA36-01-FW is a drive controller manufactured by Bosch Rexroth Indramat and supplied within the HDS Drive Controllers series. Acting as a power module for automated machinery, it converts DC bus energy into regulated three-phase output for servo axes during controlled motion. It also supervises fault response, axis synchronization, and shutdown sequences required in multi-axis production lines where several drives share a common supply. Its modular housing slides onto back-plane rails, so the unit fits coordinated cabinets neatly and keeps the power section aligned with neighboring modules on shared support hardware in a multi-axis rack.

Setpoint data are exchanged through an analog command interface, which simplifies integration with legacy PLCs that issue ±10 V speed or torque references. The power stage carries a continuous motor phase current of 300 A, enabling the module to drive large synchronous or induction motors without derating during sustained operation. Thermal stress is controlled by a built-in air blower that forces cabinet air across the heat sink instead of requiring external ducting. The controller is revision 2 and remains compatible with the DIAX04 system bus used in coordinated motion racks with multiple axis modules.

Within a coordinated cabinet, the unit uses common bus bars and diagnostic LEDs across mixed power ratings, which keeps power distribution and status indication consistent from one axis module to another. The naming code places this module in Line 05, a physical format that reserves extra depth for high-current shunts and keeps clearance to the adjacent supply section. That added depth is useful in high-current sections where spacing around shared supply hardware, bus connections, and neighboring modules must be maintained for orderly installation.