HDS05.2-W300N-HA18-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
9 Seconds
The Bosch Rexroth Indramat HDS05.2-W300N-HA18-01-FW is an HDS Drive Controller from the HDS Drive Controllers series. It features a rated current of 300 Amps and uses a built-in internal air blower for cooling. This controller belongs to the DIAX04 family and is equipped with an analog command communication interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS05.2-W300N-HA18-01-FW is a modular drive controller produced by Bosch Rexroth Indramat for multi-axis motion systems. It belongs to the HDS Drive Controllers series and forms the power section of a drive rack used for coordinated motion. Within an industrial cell, the unit governs inverter stages that energize servo motors and induction motors, converting setpoint data from the machine control into regulated torque or velocity commands for each mechanical axis. In packaging lines, machine tools, and handling systems, the drive acts as the power stage between the higher-level control and the motor. Its modular format allows it to operate as part of a larger control arrangement rather than as a standalone machine controller.
Designed for high-current applications, the controller delivers a rated continuous output of 300 A, making it suitable for large gantry axes, pressing systems, or spindle drives that require sustained motor current. The unit is part of the DIAX04 motion family, so it fits platforms that use coordinated rack-based drive components for several axes. Heat generated at this current level is removed by a built-in air blower, which provides the primary cooling path for the power section. This arrangement helps manage internal temperature while keeping the module layout suitable for enclosed industrial cabinets. It also supports stable operation during demanding motion cycles where the power stage is under heavy electrical load.
Setpoint values reach the amplifier through an ANALOG command interface, permitting direct connection to legacy PLC modules or converter cards inside the controller rack. This analog input structure is useful in retrofit systems where a digital fieldbus is not the primary command path. The product is part of Line 05 and Version 2, which identify the device revision used for this model. The unit is an HDS Drive Controller, and it supports series diagnostic features such as LED fault codes and SERCOS gateway options. These functions give the connected system clear status reporting during operation and fault handling.
Frequently Asked Questions about HDS05.2-W300N-HA18-01-FW:
Q: What type of command communication interface does the HDS05.2-W300N-HA18-01-FW use?
A: The HDS05.2-W300N-HA18-01-FW drive controller supports an ANALOG command communication interface.
Q: What is the rated current of the Bosch Rexroth HDS05.2-W300N-HA18-01-FW?
A: This drive controller provides a rated current of 300 A for demanding applications.
Q: What cooling method is utilized in the HDS05.2-W300N-HA18-01-FW drive controller?
A: The model uses a built-in internal air blower for cooling during operation.
Q: Which controller family does the HDS05.2-W300N-HA18-01-FW belong to?
A: The HDS05.2-W300N-HA18-01-FW is part of the DIAX04 controller family.
Q: What version is the HDS05.2-W300N-HA18-01-FW drive controller?
A: This drive controller is version 2 within its product series.
