Product Description:

The HDS05.2-W300N-HA16-01-FW is a drive controller produced by Bosch Rexroth Indramat for the HDS Drive Controllers series. Within an automation rack, it converts DC bus power into controlled motor current and executes motion commands received from the higher-level control system. That arrangement lets the controller act as the power and regulation stage for demanding servo axes in coordinated machinery. By combining power conversion and axis control in one module, the unit helps reduce cabinet wiring in multi-axis industrial systems. It is suited to applications that require precise current control and coordinated motion across several axes.

This controller exchanges setpoint and feedback data through an analog command interface, so drive signals are transmitted as scalable voltage or current levels rather than digital fieldbus words. Because the command channel is analog, external control systems can reference speed or torque with simple electrical signals. It belongs to the DIAX04 family, which indicates compatibility with other DIAX04 modules in the same platform. Temperature rise is limited by a built-in air blower; the fan pulls air through the heat-sink channels and exhausts it into the cabinet without external ducting. The power stage can deliver a continuous output of 300 A, providing the current needed for large synchronous servomotors under dynamic load. The unit is Version 2, which uses updated gate drivers and monitoring logic while keeping the same overall form factor.

The product is part of Line 05 in the family code. As a member of the HDS Drive Controllers series, it uses the same diagnostic LEDs and bus connectors found on related axes in the platform. This common layout supports consistent module arrangement in multi-axis systems. It is intended for use with compatible supply and motor components in the same drive platform. The shared front-panel format also helps keep interconnections orderly inside the rack.