Product Description:

The HDS04.1-W200N-HS78-01-FW is an axis drive module in the HDS Drive Controllers series. Within a DIAX04 rack, it converts shared DC bus power into regulated three-phase output so connected servo motors can follow programmed motion profiles in automated assembly lines, packaging machines, and material-handling systems. It bridges the motion controller and the motor by regulating torque, speed, or position while monitoring current and status signals for system protection. This arrangement lets the module draw energy from the rack bus and shape it into controlled motor current for coordinated axis motion. It is intended for systems where several drives share power and operate under a common motion controller.

This unit exchanges control data through the SERCOS fiber-optic interface, allowing deterministic communication on a single ring and helping multiple drives respond in step with the control system. It belongs to the DIAX04 controller family, so its dimensions and parameter structure align with other axis cards used in the same platform. Thermal control is handled by a built-in air blower, which draws cabinet air through the heat sink so external ducting is not required. The power stage is rated for a continuous output of 200 A, giving it the capacity to operate large torque motors or grouped axes that demand substantial current.

The device is part of Line 04, which corresponds to the slot arrangement used with DIAX04 common power supplies and bus modules. The drive is Version 1, so its diagnostic behavior and parameter set must match that release. Because the hardware information is kept specific to this line and version, the module fits established platform layouts without introducing a different cooling method or control interface. Its role remains focused on axis regulation inside the rack rather than operation as a stand-alone power unit.