HDS04.2-W200N-HA12-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
47 Seconds
The Bosch Rexroth Indramat HDS04.2-W200N-HA12-01-FW is part of the HDS Drive Controllers series and belongs to the DIAX04 controller family. This drive controller features an analog command communication interface, has a rated current of 200 Amps, and uses a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS04.2-W200N-HA12-01-FW is a drive controller built by Bosch Rexroth Indramat and included in the HDS Drive Controllers series. In an automated plant, this unit regulates servo axes by converting reference commands from a motion control system into regulated current and voltage for connected motors. By managing acceleration, velocity, and positioning loops, the device forms the power section of the multi-axis DIAX platform and supports coordinated machine functions such as packaging, material removal, or handling operations. This allows the connected motor to respond smoothly to commanded changes in speed and position while maintaining stable closed-loop behavior under varying load conditions.
Its command channel uses an ANALOG interface, so velocity or torque setpoints arrive as ±10 V signals that the controller translates into precise motor currents. As part of the DIAX04 controller family, it mates with compatible supply modules and shares standardized backplane bus geometry. Thermal management relies on a built-in air blower, which draws cabinet air through the heat sink to keep semiconductor temperatures within limits without external ducting. That cooling method keeps the controller self-contained inside the cabinet and removes the need for separate external airflow hardware. During operation, the power stage can deliver up to 200 A of continuous output current. As an HDS Drive Controller, the unit incorporates position loop electronics instead of requiring an external card.
The controller is part of Line 04, which places it in the fourth design line of the series. It is also marked as Version 2, indicating the product revision used for this model. Within a modular rack, the controller can operate alongside additional axes on the same platform. The module format supports installation beside matching supply and control units in a common rack, which helps preserve orderly cable routing and consistent system spacing. This arrangement supports compact multi-axis cabinets where several drive sections must operate together.
Frequently Asked Questions about HDS04.2-W200N-HA12-01-FW:
Q: What type of command communication interface does the HDS04.2-W200N-HA12-01-FW use?
A: The HDS04.2-W200N-HA12-01-FW drive controller uses an analog command communication interface.
Q: Which controller family does the HDS04.2-W200N-HA12-01-FW belong to?
A: This drive controller is part of the DIAX04 controller family from Bosch Rexroth Indramat.
Q: How is the HDS04.2-W200N-HA12-01-FW drive controller cooled?
A: The HDS04.2-W200N-HA12-01-FW utilizes a built-in internal air blower for cooling.
Q: What is the rated current for the HDS04.2-W200N-HA12-01-FW drive controller?
A: This model has a rated current of 200 A, supporting applications that require high current levels.
Q: To which line does the HDS04.2-W200N-HA12-01-FW drive controller belong?
A: The HDS04.2-W200N-HA12-01-FW belongs to the 04 line within the HDS series drive controllers.
