Product Description:

The HDS04.2-W200N-HA01-0 is a modular drive controller from Bosch Rexroth Indramat in the HDS Drive Controllers series. Installed next to supply and control modules, it translates velocity or torque references into precisely regulated motor current. The device forms the power interface between a central DC bus and multiple servo axes. By handling current regulation at the axis level, it helps the connected drive system respond quickly to load changes during starts, stops, and speed corrections. This arrangement supports coordinated motion in packaging, printing, and material-handling machines where rapid acceleration and tight speed regulation are required.

The command layer accepts analog reference voltages, so the drive follows external ±10 V speed or torque demands without requiring a digital command interface. It belongs to the DIAX04 controller family, so its backplane connections, parameter handling, and diagnostic behavior match other modules in that platform. Thermal management relies on a built-in air blower, which moves cooling air through the heat-sink fins instead of depending on ducted cabinet airflow. The power stage is rated for 200 A continuous output, allowing the controller to operate larger motors during demanding acceleration cycles. This unit is released as Version 2, which identifies the revision used for this model.

This model is assigned to Line 04, so its mechanical dimensions and connector placement align with other fourth-line modules. The controller can be combined with matching supply modules to build coordinated multi-axis systems without extra interface converters. Its modular layout also supports compact installation beside other system components on the shared DC bus. That arrangement suits machine sections where several axes must be grouped in one cabinet while still using separate control and power modules.