Product Description:

The HDS04.1-W200N-HA16-01-FW is a modular drive controller manufactured for multi-axis motion systems. Installed in a rack-based drive assembly, it converts reference commands into regulated motor current so automated equipment can follow programmed motion profiles with stable torque and speed control. It serves as the power and control stage for axes that require closed-loop response during acceleration, holding, and deceleration. The unit combines power electronics, control logic, and cooling hardware in one housing, which helps reduce cabinet wiring and supports use in machine tools, packaging stations, and material-handling axes.

Command processing is handled through an analog interface, so the controller responds to ±10 V speed or torque references rather than network-based command telegrams. This arrangement keeps command handling straightforward when a machine uses voltage-based reference signals from an external control system. Its continuous output capacity of 200 A allows it to operate large synchronous or induction motors while maintaining steady current delivery during demanding motion cycles. Thermal control is provided by a built-in air blower that moves cooling air across the heat sink and helps maintain acceptable operating temperature inside the drive. The unit is part of the DIAX04 family, so it is intended to work with compatible power supplies, feedback modules, and communication cards from the same platform.

Within the HDS Drive Controllers series, this model is assigned to Line 04. That line places it among fourth-generation units with matching mounting geometry and connector placement for the same rack format. The controller is released as Version 1, which identifies the product revision used for this configuration. It also indicates which rack layout and companion modules are appropriate for the controller. This information separates the unit from other controller variants in the broader product range.