HDS03.1-W100N-HA02-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
0 Seconds
The Bosch Rexroth Indramat HDS03.1-W100N-HA02-01-FW belongs to the HDS Drive Controllers series and features an analog command communication interface. This controller, from the DIAX04 family, is cooled by a built-in internal air blower and has a rated current of 100 A. It operates in ambient temperatures from 5 to 45 degrees Celsius and offers insulation classification C according to DIN VDE 0110.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W100N-HA02-01-FW is a drive controller from Bosch Rexroth Indramat in the HDS Drive Controllers series. Serving as an axis inverter, it converts reference signals from motion controllers into controlled motor currents and voltages for coordinated milling, printing, or conveyor positioning. The module is intended for modular multi-axis systems and can be installed with matching power supply and feedback modules inside standard industrial cabinets. In this role, it provides the regulated electrical output needed for precise axis response while remaining part of a larger cabinet-based drive assembly. Because it works with separate supply and feedback modules, the controller fits applications where several axes share a common cabinet layout and coordinated control structure.
Setpoints are accepted through an analog command interface, allowing simple voltage or current references from legacy control hardware. The power stage is rated for 100 A, which lets the controller drive medium-to-large servo motors without an external booster. Cooling is handled by a built-in air blower that moves air across the heat sink, and the enclosure is rated IP10, so the unit is intended for installation inside a protective cabinet. Internal windings and wiring use C insulation class materials, and the controller is part of the DIAX04 platform. This arrangement keeps the electrical and mechanical format consistent with other modules used in the same drive system.
For operation, the permissible ambient temperature at the mounting location is +5 to +45 °C. Output is reduced as surrounding temperature approaches +55 °C, and full output is available up to 1000 m above sea level before additional derating is required. During storage or shipment, the electronics can tolerate temperatures from -30 to +85 °C when condensation is avoided. The product is part of Line 03 and Version 1, which identifies the revision used for this controller. Altitude and temperature limits should be considered together when the unit is installed in enclosed cabinets with restricted airflow.
Frequently Asked Questions about HDS03.1-W100N-HA02-01-FW:
Q: What type of command communication interface does the HDS03.1-W100N-HA02-01-FW drive controller use?
A: The HDS03.1-W100N-HA02-01-FW model uses an analog command communication interface for control signals.
Q: How is the HDS03.1-W100N-HA02-01-FW drive controller cooled?
A: This drive controller is equipped with a built-in internal air blower for cooling.
Q: What is the rated current of the HDS03.1-W100N-HA02-01-FW drive controller?
A: The HDS03.1-W100N-HA02-01-FW has a rated current of 100 A, allowing it to handle high power requirements.
Q: What is the operating temperature range for the HDS03.1-W100N-HA02-01-FW drive controller?
A: The permissible ambient temperature range for this controller is +5 to +45°C.
Q: What is the protection category of the HDS03.1-W100N-HA02-01-FW drive controller?
A: This drive controller is classified under protection category IP10 as per DIN 40 050.
