With the development of a modular system that can conform to any shape and size, BoschRexroth has been able to create different drive parts that are greats choices for those looking to reliably automate their manufacturing or engineering company.
BoschRexroth produces the HDS class of drivecontroller. The HDS03.2-W075N-HS32-01-FW is very similar to its counterparts in the HDSseries, with the major difference being in its configuration. The input values run via a flat ribbon cable which is integrated into the HDS03.2-W075N-HS32-01-FW. The maximum length of the maximum cable is usually one meter. The HDS03.2-W075N-HS32-01-FW for its connection cross section makes use of the 2 mm2, 5 -10 mm2 of the cross section single wire, the 4 -16 mm2 of the cross-section multi-core wire along with a 3 Nm DC Bus and a 2 Nm motor connection.
In order to connect this drivecontroller to a motor, it is more advisable to use Rexroth motor cables comprising of 3 phases and 1 grounded conductor made by the Rexroth group. The maximum length of these cables made by Rexroth is a total of 75 meters. Also, for the power connection, if the units of the control cabinet are arranged horizontally, the copper strands and PE bridges should be used for the power connection of the drive and control systems. For motor configuration, the motor voltage is usually constant while the idle voltage and the corresponding magnetization and torque falls from time to time with the increasing velocity and the velocity control can be automatically used to adjust magnetization current and slip.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved