HDS03.2-W100N-HT75-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
44 Seconds
The Bosch Rexroth Indramat HDS03.2-W100N-HT75-01-FW is a drive controller in the HDS Drive Controllers series. It is part of the DIAX04 controller family and features a SERCOS command communication interface with a rated current of 100 Amps. This model has a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W100N-HT75-01-FW belongs to the HDS Drive Controllers series produced by Bosch Rexroth Indramat. It functions as an axis drive module that links servo motors to higher-level PLCs, enabling coordinated positioning and speed regulation in multi-axis industrial automation. In operation, the unit converts commanded electrical input into controlled motor current so the connected axis can follow programmed motion profiles with repeatable motion behavior. By combining power electronics and closed-loop control in one housing, it reduces cabinet space in machine tools, material-handling gantries, and packaging lines.
This controller exchanges motion commands through the SERCOS fiber-optic interface, allowing deterministic communication with neighboring drives and reducing wiring inside the cabinet. It has a current rating of 100 A, so the drive can energize medium-to-large servo motors without external boosters. The unit is part of the DIAX04 platform and uses a built-in air blower to move cooling air through dedicated channels and remove heat generated by the IGBT bridge during high-duty cycles. The optical communication path also helps reduce the influence of electrical noise on command transmission. The controller is Version 2.
The unit is categorized as an HDS Drive Controller, which indicates that it serves as the axis power and control section rather than a separate supply module. It is part of Line 03, which identifies the applicable design line for this model. Its form factor and connector arrangement match other modules from the same generation, making it suitable for installation in multi-drive racks with related motion-control hardware. The controller supports closed-loop axis operation in applications that require regulated speed and accurate position control across several coordinated axes.
Frequently Asked Questions about HDS03.2-W100N-HT75-01-FW:
Q: What communication interface does the HDS03.2-W100N-HT75-01-FW drive controller use?
A: The HDS03.2-W100N-HT75-01-FW is equipped with the SERCOS command communication interface.
Q: What is the rated current of the HDS03.2-W100N-HT75-01-FW drive controller?
A: This drive controller offers a rated current of 100 A to support demanding servo applications.
Q: How is the HDS03.2-W100N-HT75-01-FW drive controller cooled?
A: The HDS03.2-W100N-HT75-01-FW uses a built-in internal air blower for cooling.
Q: To which controller family does the HDS03.2-W100N-HT75-01-FW belong?
A: The HDS03.2-W100N-HT75-01-FW is part of the DIAX04 controller family from Bosch Rexroth Indramat.
Q: Which line of the HDS series is the HDS03.2-W100N-HT75-01-FW drive controller part of?
A: This controller is from line 03 in the HDS series product lineup.
