HDS03.2-W100N-HS95-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
39 Seconds
The Bosch Rexroth Indramat HDS03.2-W100N-HS95-01-FW is a drive controller from the HDS Drive Controllers series. It is part of the DIAX04 controller family and supports SERCOS command communication. This controller has a rated current of 100 A and uses a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W100N-HS95-01-FW is a drive controller assembled by Bosch Rexroth Indramat for the HDS Drive Controllers series. Installed in an automation cabinet, it regulates the current and velocity loops between a shared DC bus supply and the servo axes it commands. The controller forms the link between the higher-level motion system and the connected motors, converting motion setpoints into regulated motor current. This arrangement supports precise position, speed, and torque control in packaging lines, machine tools, and other multi-axis equipment. This cabinet-based arrangement keeps the power electronics close to the shared drive infrastructure and places the axis control hardware away from the machine's moving members.
The controller exchanges real-time data with the motion PLC over the SERCOS optical ring, so communication remains synchronized and resistant to electrical noise. It is part of the DIAX04 platform, which places the module on a common power and communication backplane used in multi-axis systems. Heat from the IGBT bridge is removed by a built-in air blower that circulates cabinet air across the heat sink without external ducts. Under these operating conditions, the unit can sustain 100 A of continuous motor current, which supports demanding acceleration and stable servo operation.
The unit is identified as an HDS Drive Controller for rack-mounted multi-axis applications. It belongs to Line 03, which indicates compatibility with the third design line used in this product group. In the model code, .2 indicates Version 2. This revision introduced refined monitoring functions while keeping the established connector layout and overall application role unchanged. Its rack-mounted format suits centralized drive assemblies where power supply modules and axis controllers are installed side by side in the same cabinet.
Frequently Asked Questions about HDS03.2-W100N-HS95-01-FW:
Q: What communication interface does the HDS03.2-W100N-HS95-01-FW use?
A: This drive controller uses the SERCOS interface for command communication.
Q: What is the rated current specification for the HDS03.2-W100N-HS95-01-FW?
A: The rated current for this drive controller is 100 A, supporting high power applications.
Q: Which controller family does the HDS03.2-W100N-HS95-01-FW belong to?
A: The HDS03.2-W100N-HS95-01-FW belongs to the DIAX04 controller family.
Q: What cooling method is used in the HDS03.2-W100N-HS95-01-FW drive controller?
A: Cooling for this unit is achieved through a built-in internal air blower.
Q: What version is the HDS03.2-W100N-HS95-01-FW drive controller?
A: This model is Version 2 of the HDS03.2-W100N-HS95-01-FW drive controller.
