Product Description:

The HDS03.2-W100N-HS26-01-FW is a digital drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. Deployed inside centralized or distributed cabinets, the unit converts command data from a higher-level motion processor into precisely metered and thermally stable output current for synchronous and asynchronous motors. By supervising acceleration, velocity, and shaft position, the controller helps coordinate multi-axis handling equipment, packaging lines, and machining centers so that each motor axis follows programmed profiles with repeatable accuracy.

Its primary network link is the SERCOS fiber-optic ring, allowing deterministic, high-speed telegram exchange between the drive and the motion master. Membership in the DIAX04 family means the controller slides into a common power backplane where multiple axes share a single supply module. Thermal energy is removed by a built-in air blower, so panel layouts must provide the clearance needed for airflow around the unit. The drive delivers a continuous phase output equal to its rated current of 100 A, enabling it to actuate large torque motors without saturation.

This controller belongs to Line 03 and is identified as Version 2. The mechanical outline, I/O connector pattern, and parameter memory remain consistent with the established module layout used for this controller type, so the unit fits the common backplane arrangement found in multi-axis cabinets without changing the basic cabinet structure. This layout keeps supply, motor, and feedback connections arranged in their expected positions, which supports orderly cable routing between adjacent modules and leaves clear access to shared power distribution hardware. The arrangement also suits enclosures where several axes are installed side by side and must operate from the same control platform.