HDS03.2-W100N-HS12-01-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
38 Seconds
The Bosch Rexroth Indramat HDS03.2-W100N-HS12-01-NW is a drive controller in the HDS Drive Controllers series. It belongs to the DIAX04 controller family, uses a SERCOS command communication interface, and features a built-in internal air blower for cooling. This model is rated for a current of 100 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W100N-HS12-01-NW is a drive controller manufactured by Bosch Rexroth Indramat and supplied within the HDS Drive Controllers series. As a controller, it coordinates power delivery to connected servo modules so axis motion follows programmed commands in automated machinery, packaging lines, or material-handling stations. In a closed-loop motion system, it helps regulate motor operation so commanded acceleration, deceleration, and steady-speed behavior remain stable during operation. The unit belongs to the HDS branch of the DIAX platform, giving multi-axis systems a consistent control footprint. This makes it suitable for equipment that depends on synchronized axis movement and repeatable response.
The command interface is SERCOS, a deterministic serial bus that passes motion setpoints and feedback in real time between the drive, PLC, and other nodes. This communication path supports time-aligned command updates and status exchange across the motion network. A continuous output capability of 100 A allows the controller to energize large servo motors without external boosting hardware. Thermal management is handled by a built-in air blower, which draws cabinet air across the heat sink so rated current can be maintained within the specified ambient range. Within the DIAX architecture, this controller is part of the DIAX04 family. Functionally, it is an HDS Drive Controller for precision speed and torque control.
The production line code is Line 03, and the hardware is released as Version 2. These identifiers distinguish this model within the product range and separate it from other releases in the same platform. The controller is intended for multi-axis arrangements that use a common rack layout and coordinated electrical control across several servo axes. It operates as the regulated power and control stage for connected motion components, supporting accurate axis response in automated systems.
Frequently Asked Questions about HDS03.2-W100N-HS12-01-NW:
Q: What command communication interface is available on the HDS03.2-W100N-HS12-01-NW?
A: This drive controller uses a SERCOS command communication interface.
Q: Which controller family includes the HDS03.2-W100N-HS12-01-NW?
A: The HDS03.2-W100N-HS12-01-NW belongs to the DIAX04 controller family.
Q: What cooling method is used on the HDS03.2-W100N-HS12-01-NW drive controller?
A: A built-in internal air blower is used for cooling this model.
Q: What is the rated current of the Bosch Rexroth Indramat HDS03.2-W100N-HS12-01-NW?
A: This model has a rated current of 100 A for high-capacity output.
Q: What version is the HDS03.2-W100N-HS12-01-NW drive controller?
A: The version of this HDS drive controller is 2, indicating its specific build revision.
