HDS03.2-W100N-HA25-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
48 Seconds
The Bosch Rexroth Indramat HDS03.2-W100N-HA25-01-FW is an HDS Drive Controller from the HDS Drive Controllers series. This controller, part of the DIAX04 family, features an analog command communication interface and a rated current of 100 Amps. It uses a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W100N-HA25-01-FW is an axis drive controller manufactured by Bosch Rexroth Indramat as part of the HDS Drive Controllers series. Installed in a control cabinet, it converts motion commands from supervisory equipment into regulated current and voltage for servo motors. The module closes speed and torque loops in real time so axes can follow commanded motion in packaging lines, pick-and-place cells, and metal-cutting machines. Its rack-mounted format occupies one slot in the drive assembly. It also links field-level reference signals with motor feedback so the higher-level controller can maintain accurate shaft behavior under changing mechanical loads.
The controller uses an ANALOG command interface with ±10 V setpoint signals, which supports legacy and retrofit PLC architectures. Internally, the power stage can supply a continuous phase current of 100 A, indicating the maximum sustained output available to the connected motor. Heat from the IGBT section is removed by a built-in air blower, so the unit does not require external ducting for normal cooling. This cooling method supports stable thermal operation in cabinet installations where controlled airflow is already present around the drive rack. The combination of analog command input and closed-loop regulation allows the controller to support precise speed and torque control in established automation systems.
The unit is part of the DIAX04 controller family, so it fits rack-based systems that use a shared DC bus and coordinated axis control. It is assigned to Line 03 and built in Version 2. These identifiers indicate the product generation used for this controller and distinguish it from other members of the same family. The shared platform also uses common display behavior and parameter organization across matching modules in the same cabinet. This makes the controller suitable for multi-axis installations where several drives operate together in one rack.
Frequently Asked Questions about HDS03.2-W100N-HA25-01-FW:
Q: What type of command communication interface does the HDS03.2-W100N-HA25-01-FW support?
A: The HDS03.2-W100N-HA25-01-FW uses an analog command communication interface for control signals.
Q: Which controller family does the HDS03.2-W100N-HA25-01-FW belong to?
A: This drive controller is part of the DIAX04 controller family.
Q: How is the HDS03.2-W100N-HA25-01-FW drive controller cooled?
A: The HDS03.2-W100N-HA25-01-FW is cooled by a built-in internal air blower.
Q: What is the rated current of the HDS03.2-W100N-HA25-01-FW drive controller?
A: The rated current for this drive controller is 100 A, allowing for high power handling.
Q: Which line of HDS drive controllers does the HDS03.2-W100N-HA25-01-FW come from?
A: This model is from line 03 of the HDS series drive controllers.
