Product Description:

The HDS03.2-W100N-HA16-01-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. Installed beside a compatible supply module, it converts low-level reference signals into precisely timed motor currents, supplying closed-loop velocity or position control for conveyors, pick-and-place axes, and other automated equipment.

At the power stage, the module supports a continuous output of 100 A, providing ample current headroom for mid-frame servo motors operating on dynamic duty cycles. Drive commands enter through an ANALOG interface, allowing ±10 V or 4–20 mA set-points generated by legacy PLC cards. Thermal energy produced by the IGBT stack is removed via a built-in internal air blower, so cabinet airflow design is simplified. Hardware coding identifies the device as Line 03, denoting the electrical revision that mates with corresponding supply and feedback boards without adapter kits.

Firmware labeling classifies the controller as Version 2, which adds faster current-loop sampling while keeping existing parameter maps intact. Alternative build codes are stated as none, reducing configuration complexity when spares are ordered across multiple machines. Within the DIAX rack it occupies the DIAX04 slot pattern and is catalogued at the product level as an HDS Drive Controller, permitting direct insertion into the common backplane with only the standard 24 V logic feed and fiber-optic drive bus.

Wake Industrial stocks this unit and can arrange same-day shipping when schedules are tight. Quotations issued for the controller remain valid for 30 days. Customers benefit from rapid availability because the product is already in inventory.